Especially for printers with inward blowing ventilators or without ventilators it is recommended to use the cabinet “Nautilus-EVO2” as thus all emissions from these machines can be filtered at one point. As a matter of course, the cabinet “Nautilus-EVO2” does also work with printers with outward blowing ventilators with the same effectiveness. Almost all current printer types can be placed functionally in this toner dust protection cabinet “Nautilus-EVO2”.

It presents the following advantages:

• it may include printers of different size due to its height-adjustable board
• the dust protection cabinet adapts to the needs, if for example further paper trays are placed below the printer
• the upper side of the printer remains always at the same working height

General Description:

• MDF cabinet coated by melamine
• glass pane material: plexiglass (PMMA)
• quality gas pressure damper for secure hold of the glass pane in every position
• adjustable opening angle of the pane by means of hex-wrench
• plexiglass door in the front
• a blowing ventilator (35 dBA; 78 m³/h) with a Clean Office Carbon filter at the back side
• an air entrance covered by a metal grid D = 120 mm in the plexiglass door
• plug for non-heating devices for printer and ventilator all-in-one
• low-heat cable as printer connection cable
• exterior lighted central switch for printer and ventilator
• two cable ducts at the back side
• colour: RAL 7035 light grey
• four adjustable rollers
• a height-adjustable printer bottom as construction panel
• a height-adjustable construction panel

Dimensions:
Printers tray: depth = 640 mm
Shelf:           depth = 640 mm

The “Nautilus-EVO2” is available in two widths:

Nautilus-EVO2-720: (720 mm wide)
Internal dimensions:     width x depth x height 720 mm x 680 mm x 1000 mm
External dimensions:    width x depth x height 760 mm x 785 mm x 1130 mm

Nautilus-EVO2-530: (530 mm wide)
Internal dimensions:     width x depth x height 530 mm x 680 mm x 1000 mm
External dimensions:    width x depth x height 570 mm x 785 mm x 1130 mm