CLEAN OFFICE - Ozon- und Feinstaubfilter für Laserdrucker

Clean Office - dust filter for radiators

Dusty air in the office? Coughing? Scratchy throat? Protect yourself by using the new dust filter for radiators in the CLEAN OFFICE range. The next heating season is just around the corner. Movement in offices can stir up existing dust including ultra fine particles. Due to the natural air circulation coming from the warm radiators this will be spread all over the office. Use now the thermal of your heating for dust filtration! The open-pored CLEAN OFFICE dust filter for radiators is electrostatically charged, and has minimal effect on air circulation. At the same time it filters up to 90% of the different-sized dust particles existing in the air, and this has been tested by the independent testing institute "SLG Prüf- und Zertifizierungs GmbH".


	The filters have a dimension of 300 x 100 x 10 mm and can be easily cut to size. 3 filters placed side by side cover the open surface of a standard two-plates radiator that will be mounted to about 80%. With the aid of a second package you can also cover larger radiators.

Depending on dust exposure the filters are lasting 3 months up to a whole heating season. You will have to change the filter when the filter surface shows a considerable grey discolouration.	new and used filter

	E-Mail

Riensch & Held GmbH & Co.KG
Postfach 80 05 47, D-21005 Hamburg,
Tel.: +49 40 734 24 0, Fax.: +49 40 734 24 160
E-Mail